当前位置: 技术问答>linux和unix
cramfs: wrong magic
来源: 互联网 发布时间：2015-12-07
本文导语: 哪位来帮忙分析下，问题是出在内核还是出在文件系统身上 谢谢 打印信息如下： --------------------------------------------------------------------- VIVI version 0.1.4 (root@localhost.localdomain) (gcc version 2.95.2 20000516 (r6MMU table base a...
哪位来帮忙分析下，问题是出在内核还是出在文件系统身上
谢谢
打印信息如下：
---------------------------------------------------------------------
VIVI version 0.1.4 (root@localhost.localdomain) (gcc version 2.95.2 20000516 (r6MMU table base address = 0x33DFC000
allocate S3C2410 NAND MTD device structure.
NAND device: Manufacture ID: 0xec, Chip ID: 0x79 (Samsung K9D1G08V0M)
NAND device size = 128M /* smc_core.c -> smc_scan() */
define flash size = 128M /* smdk2410.h */
Could not found stored vivi parameters. Use default vivi parameters.
Press Return to start the LINUX now, any other key for vivi300
Copy linux kernel from 0x00030000 to 0x30008000, size = 0x000c0000 ... done
zImage magic = 0x016f2818
Setup linux parameters at 0x30000100
linux command line is: "noinitrd root=/dev/mtdblock/1 init=/linuxrc console=tty"MACH_TYPE = 193
NOW, Booting Linux......
Uncompressing Linux...................................................... done,.Linux version 2.4.18-rmk7-pxa1 (root@localhost.localdomain) (gcc version 2.95.25CPU: ARM/CIRRUS Arm920Tsid(wb) revision 0
Machine: Samsung-SMDK2410
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
DEBUG: timer count 15626
Console: colour dummy device 80x30
Calibrating delay loop... 99.94 BogoMIPS // calibrate_delay()
谢谢
打印信息如下：
---------------------------------------------------------------------
VIVI version 0.1.4 (root@localhost.localdomain) (gcc version 2.95.2 20000516 (r6MMU table base address = 0x33DFC000
allocate S3C2410 NAND MTD device structure.
NAND device: Manufacture ID: 0xec, Chip ID: 0x79 (Samsung K9D1G08V0M)
NAND device size = 128M /* smc_core.c -> smc_scan() */
define flash size = 128M /* smdk2410.h */
Could not found stored vivi parameters. Use default vivi parameters.
Press Return to start the LINUX now, any other key for vivi300
Copy linux kernel from 0x00030000 to 0x30008000, size = 0x000c0000 ... done
zImage magic = 0x016f2818
Setup linux parameters at 0x30000100
linux command line is: "noinitrd root=/dev/mtdblock/1 init=/linuxrc console=tty"MACH_TYPE = 193
NOW, Booting Linux......
Uncompressing Linux...................................................... done,.Linux version 2.4.18-rmk7-pxa1 (root@localhost.localdomain) (gcc version 2.95.25CPU: ARM/CIRRUS Arm920Tsid(wb) revision 0
Machine: Samsung-SMDK2410
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
DEBUG: timer count 15626
Console: colour dummy device 80x30
Calibrating delay loop... 99.94 BogoMIPS // calibrate_delay()
您可能感兴趣的文章:
本站(WWW.)旨在分享和传播互联网科技相关的资讯和技术，将尽最大努力为读者提供更好的信息聚合和浏览方式。
本站(WWW.)站内文章除注明原创外，均为转载、整理或搜集自网络。欢迎任何形式的转载，转载请注明出处。
本站(WWW.)站内文章除注明原创外，均为转载、整理或搜集自网络。欢迎任何形式的转载，转载请注明出处。
站内导航:
特别声明:169IT网站部分信息来自互联网,如果侵犯您的权利,请及时告知,本站将立即删除！