当前位置:  数据库>oracle

Oracle 10gR2 DataGuard搭建(非duplicate方式)

    来源: 互联网  发布时间：2017-06-26

    本文导语: Oracle 10gR2 DataGuard搭建(非duplicate方式) 我的实验环境：源生产库(主库)：IP地址：192.168.1.30Oracle 10.2.0.5 单实例 新DG库（备库）：IP地址：192.168.1.31Oracle 10.2.0.5 单实例 1.源生产库开启归档 2.rman备份源生产库 3.修改源生产库参数 4.配...

Oracle 10gR2 DataGuard搭建(非duplicate方式)

我的实验环境：
源生产库(主库)：
IP地址：192.168.1.30
Oracle 10.2.0.5 单实例

新DG库（备库）：
IP地址：192.168.1.31
Oracle 10.2.0.5 单实例

  • 1.源生产库开启归档
  • 2.rman备份源生产库
  • 3.修改源生产库参数
  • 4.配置tnsnames.ora
  • 5.同步密码文件
  • 6.配置pfile文件
  • 7.创建备库控制文件
  • 8.还原备库
  • 9.开启日志应用
  • 10.switchover测试
  • 11.创建还原点，激活备库测试
  • 12.failover测试
1.源生产库开启归档

部署Dataguard环境，要求主库必须开启归档模式；如果没有开启，需要先申请停机开启归档。

shutdown immediate
startup mount
alter database archivelog;
alter database open;
archive log list;

注意：归档日志存放位置，并制定归档日志删除策略；

归档日志删除举例(删除7天前归档)：

vi delarch.sql
crosscheck archivelog all;
delete noprompt archivelog all completed before "sysdate-7";

vi delarch.sh
#!/bin/bash
#Oracle ENV (you may need to change it.)
export ORACLE_BASE=/u01/app/oracle
export ORACLE_HOME=/u01/app/oracle/product/10.2.0/db_1
export ORACLE_SID=ora10
export PATH=$ORACLE_HOME/bin:$PATH
rman target / @/home/oracle/rman/delarch.sql log=/home/oracle/rman/delarch.log

如果之前主库开启了归档，且有合理的备份策略；则实际上很可能不需要此步骤单独清除归档。

2.rman备份源生产库

将主库rman全备，视具体情况选择是否压缩备份集，我这里空间有限选择压缩备份集。

备份脚本：

[oracle@oradb30 rman]$ cat backup.sql 
run {
allocate channel d1 type disk;
allocate channel d2 type disk;
backup as compressed backupset database format '/orabak/rman/data_%d_%T_%s.bak' plus archivelog format '/orabak/rman/log_%d_%T_%s.bak';
release channel d1;
release channel d2;
}

[oracle@oradb30 rman]$ cat backup.sh
#!/bin/bash
export ORACLE_BASE=/u01/app/oracle
export ORACLE_HOME=/u01/app/oracle/product/10.2.0/db_1
export ORACLE_SID=ora10
export PATH=$ORACLE_HOME/bin:$PATH
rman target / @backup.sql log backup.log

执行备份：
[oracle@oradb30 rman]$ nohup sh backup.sh &

[oracle@oradb30 rman]$ tail -200f backup.log 

Recovery Manager: Release 10.2.0.5.0 - Production on Wed Jan 4 21:47:23 2017

Copyright (c) 1982, 2007, Oracle.  All rights reserved.

connected to target database: ORA10 (DBID=914008358)

RMAN> run {
2> allocate channel d1 type disk;
3> allocate channel d2 type disk;
4> backup as compressed backupset database format '/orabak/rman/data_%d_%T_%s.bak' plus archivelog format '/orabak/rman/log_%d_%T_%s.bak';
5> release channel d1;
6> release channel d2;
7> }
8> 
using target database control file instead of recovery catalog
allocated channel: d1
channel d1: sid=143 devtype=DISK

allocated channel: d2
channel d2: sid=142 devtype=DISK


Starting backup at 04-JAN-17
current log archived
channel d1: starting compressed archive log backupset
channel d1: specifying archive log(s) in backup set
input archive log thread=1 sequence=46 recid=45 stamp=932415090
input archive log thread=1 sequence=47 recid=46 stamp=932420845
channel d1: starting piece 1 at 04-JAN-17
channel d2: starting compressed archive log backupset
channel d2: specifying archive log(s) in backup set
input archive log thread=1 sequence=43 recid=42 stamp=932414314
input archive log thread=1 sequence=44 recid=43 stamp=932414362
input archive log thread=1 sequence=45 recid=44 stamp=932415036
channel d2: starting piece 1 at 04-JAN-17
channel d1: finished piece 1 at 04-JAN-17
piece handle=/orabak/rman/log_ORA10_20170104_102.bak tag=TAG20170104T214725 comment=NONE
channel d1: backup set complete, elapsed time: 00:00:02
channel d2: finished piece 1 at 04-JAN-17
piece handle=/orabak/rman/log_ORA10_20170104_103.bak tag=TAG20170104T214725 comment=NONE
channel d2: backup set complete, elapsed time: 00:00:02
Finished backup at 04-JAN-17

Starting backup at 04-JAN-17
channel d1: starting compressed full datafile backupset
channel d1: specifying datafile(s) in backupset
input datafile fno=00001 name=/oradata/ora10/ORA10/datafile/o1_mf_system_d5tw48bw_.dbf
input datafile fno=00002 name=/oradata/ora10/ORA10/datafile/o1_mf_undotbs1_d5tw48d8_.dbf
input datafile fno=00004 name=/oradata/ora10/ORA10/datafile/o1_mf_users_d5tw48dg_.dbf
channel d1: starting piece 1 at 04-JAN-17
channel d2: starting compressed full datafile backupset
channel d2: specifying datafile(s) in backupset
input datafile fno=00003 name=/oradata/ora10/ORA10/datafile/o1_mf_sysaux_d5tw48c3_.dbf
input datafile fno=00007 name=/oradata/ora10/ORA10/datafile/o1_mf_forhapoc_d5x5bm2b_.dbf
input datafile fno=00005 name=/oradata/ora10/ORA10/datafile/o1_mf_dbs_d_ji_d5x45hbj_.dbf
input datafile fno=00006 name=/oradata/ora10/ORA10/datafile/o1_mf_dbs_i_ji_d5x45jd9_.dbf
channel d2: starting piece 1 at 04-JAN-17
channel d2: finished piece 1 at 04-JAN-17
piece handle=/orabak/rman/data_ORA10_20170104_105.bak tag=TAG20170104T214728 comment=NONE
channel d2: backup set complete, elapsed time: 00:00:35
channel d1: finished piece 1 at 04-JAN-17
piece handle=/orabak/rman/data_ORA10_20170104_104.bak tag=TAG20170104T214728 comment=NONE
channel d1: backup set complete, elapsed time: 00:00:42
Finished backup at 04-JAN-17

Starting backup at 04-JAN-17
current log archived
channel d1: starting compressed archive log backupset
channel d1: specifying archive log(s) in backup set
input archive log thread=1 sequence=48 recid=47 stamp=932420890
channel d1: starting piece 1 at 04-JAN-17
channel d1: finished piece 1 at 04-JAN-17
piece handle=/orabak/rman/log_ORA10_20170104_106.bak tag=TAG20170104T214810 comment=NONE
channel d1: backup set complete, elapsed time: 00:00:02
Finished backup at 04-JAN-17

Starting Control File and SPFILE Autobackup at 04-JAN-17
piece handle=/orabak/rman/20170104/controlfilec-914008358-20170104-06 comment=NONE
Finished Control File and SPFILE Autobackup at 04-JAN-17

released channel: d1

released channel: d2

Recovery Manager complete.


[1]+  Done                    nohup sh backup.sh
[oracle@oradb30 rman]$

备份完成后,将备份集拷贝到备机。

3.修改源生产库参数

查看主库文件(数据文件、临时文件、重做日志文件)存放目录：

select name from v$datafile union all
select name from v$tempfile union all
select member from v$logfile;

修改源生产库参数：

--设置convert参数（我这里源端和目标端都设置了db_create_file_dest，没有设置这两个参数）
alter system set log_file_name_convert='','' scope=spfile;
alter system set db_file_name_convert='','' scope=spfile;
--设置数据库为force logging
alter database force logging;
--设置db_unique_name, log_archive_config(这里主库的db_unique_name，出于对现有的生产环境最小影响考虑没有改)
alter system set db_unique_name='ora10' scope=spfile;
alter system set log_archive_config='DG_CONFIG=(ora10,ora10dg)'; 
--归档日志目录
alter system set log_archive_dest_1='LOCATION=/orabak/arch VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=ora10';
alter system set log_archive_dest_2='SERVICE=ora10dg ASYNC LGWR VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=ora10dg';
--归档日志文件命名规则
alter system set log_archive_format='arch_%r_%t_%s.arc' scope=spfile;
--DG的fal_server和fal_client
alter system set fal_server='ora10dg';
alter system set fal_client='ora10';
--设置standby_file_management为自动
alter system set standby_file_management=AUTO; 
--设置备库日志文件组，数量一般为目标库日志文件组+1
alter database add standby logfile group 11 size 52428800; 
alter database add standby logfile group 12 size 52428800; 
alter database add standby logfile group 13 size 52428800; 
alter database add standby logfile group 14 size 52428800;
4.配置tnsnames.ora

Dataguard环境，log_archive_config的配置，就是用到tnsnames.ora配置文件中的别名。

--配置tnsnames.ora
在主库所有节点上的tnsnames.ora添加相应的连接串，并传给备库。
---主库tnsnames.ora添加
vi $ORACLE_HOME/network/admin/tnsnames.ora

ORA10 =
  (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.30)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = ora10)
    )
  )

ORA10DG =
  (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.31)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = ora10dg)
    )
  )

将tnsnames.ora上传到备库，如果之前tnsnames有其他内容，可以选择添加内容，只要最终保证主备库可以互相访问即可。

5.同步密码文件 
--密码文件从主库拷贝到备库
[oracle@oradb30 dbs]$ scp orapwora10 192.168.1.31:/u01/app/oracle/product/10.2.0/db_1/dbs/
oracle@192.168.1.31's password: 
orapwora10                                                                                                                                                  100% 1536     1.5KB/s   00:00    
[oracle@oradb30 dbs]$
6.配置pfile文件

Dataguard环境下，需要将主库的参数文件传到备库，进行修改，尤其注意路径在备库都存在且有相应权限。

--创建pfile文件

从主库的spfile中导出pfile文件，上传到备库，并做适当的修改调整。
--在主库上创建pfile文件，并上传到备库
create pfile='/tmp/init.ora' from spfile;

SQL> create pfile='/tmp/init.ora' from spfile;

File created.

SQL> exit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
[oracle@oradb30 dbs]$ scp /tmp/init.ora 192.168.1.31:/tmp/
reverse mapping checking getaddrinfo for bogon failed - POSSIBLE BREAK-IN ATTEMPT!
oracle@192.168.1.31's password: 
init.ora                                                                                                                                                    100% 1430     1.4KB/s   00:00    
[oracle@oradb30 dbs]$

--备库最终pfile参数文件
[oracle@oradb31 admin]$ vi /tmp/init.ora

*.audit_file_dest='/u01/app/oracle/admin/ora10/adump'
*.background_dump_dest='/u01/app/oracle/admin/ora10/bdump'
*.compatible='10.2.0.5.0'
*.core_dump_dest='/u01/app/oracle/admin/ora10/cdump'
*.db_block_size=8192
*.db_create_file_dest='/oradata'
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_name='ora10'
*.db_recovery_file_dest='/orabak/flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.db_unique_name='ora10dg'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=ora10XDB)'
*.fal_client='ora10dg'
*.fal_server='ora10'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(ora10dg,ora10)'
*.log_archive_dest_1='LOCATION=/orabak/arch VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=ora10dg'
*.log_archive_dest_2='SERVICE=ora10 ASYNC LGWR VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=ora10'
*.log_archive_format='arch_%r_%t_%s.arc'
*.open_cursors=300
*.pga_aggregate_target=96468992
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=290455552
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='/u01/app/oracle/admin/ora10/udump'

启动备库到nomount状态：

SQL> startup nomount pfile='/tmp/init.ora';
ORA-01261: Parameter db_recovery_file_dest destination string cannot be translated
ORA-01262: Stat failed on a file destination directory
Linux-x86_64 Error: 2: No such file or directory
SQL> exit
Disconnected
[oracle@oradb31 admin]$ mkdir -p /orabak/flash_recovery_area
[oracle@oradb31 admin]$ sqlplus / as sysdba

SQL*Plus: Release 10.2.0.5.0 - Production on Wed Jan 4 23:24:25 2017

Copyright (c) 1982, 2010, Oracle.  All Rights Reserved.

Connected to an idle instance.

SQL>  startup nomount pfile='/tmp/init.ora';
ORACLE instance started.

Total System Global Area  293601280 bytes
Fixed Size                  2095768 bytes
Variable Size             146802024 bytes
Database Buffers          138412032 bytes
Redo Buffers                6291456 bytes
SQL> exit
7.创建备库控制文件

Dataguard环境下，需要在主库创建备库的控制文件并传输到备库。

--创建控制文件
主库执行，创建备库控制文件

alter database create standby controlfile as '/tmp/control01.ctlbak';

[oracle@oradb30 dbs]$ scp /tmp/control01.ctlbak 192.168.1.31:/tmp/
reverse mapping checking getaddrinfo for bogon failed - POSSIBLE BREAK-IN ATTEMPT!
oracle@192.168.1.31's password: 
control01.ctlbak                                                                                                                                            100% 6928KB   6.8MB/s   00:00
8.还原备库 8.1 在备库上启动数据库到nomount状态 
#创建SPFILE
SQL>create SPFILE from pfile='/tmp/init.ora';

#启动到nomount状态
startup nomount
8.2 启动数据库到mount状态

restore controlfile from '/tmp/control01.ctlbak';
alter database mount;

可能需要手工注册备份集；
crosscheck backupset;
catalog start with '/orabak/rman/';

8.3 还原备份

vi /home/oracle/scripts/restore.sh

rman target /  alter system set log_archive_dest_state_2=defer;
SQL> alter system set log_archive_dest_state_2=enable;
SQL> alter system switch logfile;
11. 创建还原点，激活备库测试 11.1 创建restore point

1) 在备库上设置flashback区域及大小

SQL> alter system set db_recovery_file_dest='/orabak/flash_recovery_area';
SQL> alter system set db_recovery_file_dest_size=1000g;
SQL> select current_scn||'' from v$database;

2) Standby库取消redo日志应用并创建一个数据库闪回点

SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL;
--这里注意下，如果你的备库环境是RAC，需要关闭其他节点，然后才可以创建restore point：
SQL> drop restore point before_application_test;
SQL> CREATE RESTORE POINT before_application_test GUARANTEE FLASHBACK DATABASE;
Restore point created.
11.2 激活备库

1) 停止主库的日志传到备库

SQL> ALTER SYSTEM SET LOG_ARCHIVE_DEST_STATE_2=defer;

2) 激活备库

SQL> alter system set job_queue_processes = 0 scope=both sid='*';
SQL> ALTER DATABASE ACTIVATE STANDBY DATABASE;
SQL> shutdown immediate
SQL> startup

3) 检查dblinks
select * from dba_db_links;
如果有dblink需要删除或其他方式禁用；

4）通知新的应用IP，开始测试应用工作

注意：为了预防测试过程中有job或者dblink修改了其他数据库信息，一般要修改job_queue_processes参数，删除dblink。
--参数
alter system set job_queue_processes = 0 scope=both sid='';
--dblinks
select from dba_db_links;

11.3 闪回恢复备库

1) 恢复备库

SQL> shutdown immediate
SQL> startup mount;
SQL> FLASHBACK DATABASE TO RESTORE POINT before_application_test;
SQL> ALTER DATABASE CONVERT TO PHYSICAL STANDBY;
SQL> shutdown immediate
SQL> startup mount
SQL> alter database recover managed standby database using current logfile disconnect;
恢复参数job_queue_processes设置值：
alter system set job_queue_processes = 10 scope=both sid='*';
恢复参数db_recovery_file_dest_size设置值：
alter system set db_recovery_file_dest_size=2g;

2) 恢复日志传输
恢复主库的日志传到备库

ALTER SYSTEM SET LOG_ARCHIVE_DEST_STATE_2=enable;
12. failover测试

failover，源生产库不再可用，备库强制激活为主库；

ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL;
#操作不可逆，确定实际情况需要failover
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE FINISH force;
SELECT OPEN_MODE, DATABASE_ROLE, SWITCHOVER_STATUS, FORCE_LOGGING, DATAGUARD_BROKER, GUARD_STATUS FROM V$DATABASE; 
#尝试常规切换为主库
ALTER DATABASE COMMIT TO SWITCHOVER TO PRIMARY WITH SESSION SHUTDOWN;
如果这一步的常规切换失败，提示需要介质恢复，那么：
 1）恢复备库 recover standby database until cancel;
 2）激活备库 alter database activate standby database;
#最后重新启动数据库
shutdown immediate;
startup

failover之后，即便原主库恢复也要重新搭建DG了。

Oracle 11gR2 在VMWare虚拟机中安装步骤

Debian 下 安装 Oracle 11g XE R2

Oracle Data Guard 重要配置参数

基于同一主机配置 Oracle 11g Data Guard

探索Oracle之11g DataGuard

手把手教你搭建Oracle 11g DataGuard 

Oracle Data Guard （RAC+DG) 归档删除策略及脚本

Oracle Data Guard 的角色转换

Oracle Data Guard的日志FAL gap问题

Oracle 11g Data Guard Error 16143 Heartbeat failed to connect to standby 处理方法

：


    
 
 
 
本站(WWW.)旨在分享和传播互联网科技相关的资讯和技术，将尽最大努力为读者提供更好的信息聚合和浏览方式。
本站(WWW.)站内文章除注明原创外，均为转载、整理或搜集自网络。欢迎任何形式的转载，转载请注明出处。












  • 相关文章推荐
  • Oracle 12c发布简单介绍及官方下载地址
  • 在linux下安装oracle,如何设置让oracle自动启动！也就是让oracle那个服务自动启动，不是手动的
  • oracle 11g最新版官方下载地址
  • 请问su oracle 和su - oracle有什么不同？
  • Oracle 数据库(oracle Database)Select 多表关联查询方式
  • 虚拟机装Oracle R12与Oracle10g
  • Oracle数据库(Oracle Database)体系结构及基本组成介绍
  • Oracle 数据库开发工具 Oracle SQL Developer
  • 如何设置让Oracle SQL Developer显示的时间包含时分秒
  • Oracle EBS R12 支持 Oracle Database 11g
  • Oracle 10g和Oracle 11g网格技术介绍
  • SCO unix下安装oracle，但没有光盘，请大家推荐一个oracle下载站点（unix版本的）。谢谢！！！！
  • oracle中如何把表中具有相同值列的多行数据合并成一行
  • 请问大家用oracle数据库, 用import oracle.*;下的东西么? 还是用标准库?
  • Oracle 数据库(oracle Database)性能调优技术详解
  • Linux /$ORACLE_HOME $ORACLE_HOME
  • ORACLE日期相关操作
  • Linux系统下Oracle的启动与Oracle监听的启动
  • ORACLE数据库常用字段数据类型介绍
  • 请问在solaris下安装ORACLE，用root用户和用oracle用户安装有什么区别么？
  • Oracle 12c的九大最新技术特性介绍
  • 网间Oracle的连接，远程连接Oracle服务器？？


    • 站内导航:


    特别声明:169IT网站部分信息来自互联网,如果侵犯您的权利,请及时告知,本站将立即删除！

    ©2012-2021,,E-mail:www_#163.com(请将#改为@)

    浙ICP备11055608号-3