当前位置: 技术问答>linux和unix
请问在这种情况下如何安装linux9.0,谢谢!
来源: 互联网 发布时间:2015-05-27
本文导语: 我得机器为dell的品牌机器,硬盘为SATA的120g,在安装linux9.0时,提示如下: an error has occurred -no valid devices were found on which to create new filw systems. ...
我得机器为dell的品牌机器,硬盘为SATA的120g,在安装linux9.0时,提示如下:
an error has occurred -no valid devices were found on
which to create new filw systems.
please check your hardware for the cause of this problem.
请问如何解决?
先谢谢了!
an error has occurred -no valid devices were found on
which to create new filw systems.
please check your hardware for the cause of this problem.
请问如何解决?
先谢谢了!
|
当然是要在linux下编译了
到kernel.org 下载好内核
配置好参数,然后编译好
重新配置grub.conf或者lilo.conf
重新启动机器,用刚编译的内核引导
具体在下载的内核source目录里面有文档说明的
到kernel.org 下载好内核
配置好参数,然后编译好
重新配置grub.conf或者lilo.conf
重新启动机器,用刚编译的内核引导
具体在下载的内核source目录里面有文档说明的
|
2.6内核支持SATA硬盘,但目前还没有2.6内核的linux,看来你得改变计划了