当前位置: 技术问答>linux和unix
Solaris 安装问题 - Bad magic number in disk label Can't open disk label package
来源: 互联网 发布时间：2017-05-21
本文导语: 本帖最后由 global_biz 于 2014-06-04 18:31:23 编辑 Hi, 我在用 Simics 安装 Solaris 的时候，安装 peanut-sol8-cd-install1.simics 很顺利就安装完了， 到了安装 peanut-sol8-cd-install2.simics 的时候，在启动的时候，光驱已经成功加载...
Hi,
我在用 Simics 安装 Solaris 的时候，安装 peanut-sol8-cd-install1.simics 很顺利就安装完了，
到了安装 peanut-sol8-cd-install2.simics 的时候，在启动的时候，光驱已经成功加载到了，
但是，出现 Bad magic number in disk label Can't open disk label package Can't open boot device
我自己试过很多次，重装 install1 也试过了，但是每次到了 install2 都是出同样问题，请问是怎么回事？如何解决？
谢谢。
以下是相关的 log 供参考：
我在用 Simics 安装 Solaris 的时候，安装 peanut-sol8-cd-install1.simics 很顺利就安装完了，
到了安装 peanut-sol8-cd-install2.simics 的时候，在启动的时候，光驱已经成功加载到了，
但是，出现 Bad magic number in disk label Can't open disk label package Can't open boot device
我自己试过很多次，重装 install1 也试过了，但是每次到了 install2 都是出同样问题，请问是怎么回事？如何解决？
谢谢。
以下是相关的 log 供参考：
Switching to high addresses
Setting up TLBs Done
MMU ON
PC = 0000.01ff.f000.1cb8
PC = 0000.0000.0000.1d24
Decompressing into Memory Done
Size = 0000.0000.0006.d840
ttya initialized
Using POST's System Configuration
Setting up memory
Clock board TOD does not match TOD on any IO board.
fhc ac simm-status environment sram flashprom SUNW,UltraSPARC-II
Probing UPA Slot at 2,0 sbus fhc ac environment flashprom eeprom sbus-speed counter-timer
Probing UPA Slot at 3,0 sbus counter-timer
Probing /sbus@2,0 at 1,0 Nothing there
Probing /sbus@2,0 at 2,0 Nothing there
Probing /sbus@3,0 at 3,0 SUNW,hme SUNW,fas sd st
Probing /sbus@3,0 at 0,0 Nothing there
16-slot Sun Enterprise E6500, No Keyboard
OpenBoot 3.2.29, 256 MB memory installed, Serial #8407660.
Copyright 2001 Sun Microsystems, Inc. All rights reserved
Ethernet address 10:10:10:10:10:12, Host ID: 80804a6c.
Rebooting with command: boot
Boot device: disk1 File and args:
Bad magic number in disk label
Can't open disk label package
Evaluating: boot
Can't open boot device
ok
ok
ok show-devs
/counter-timer@3,3c00
/sbus@3,0
/counter-timer@2,3c00
/fhc@2,f8800000
/sbus@2,0
/SUNW,UltraSPARC-II@0,0
/fhc@0,f8800000
/central@1f,0
/virtual-memory
/memory@0,0
/aliases
/options
/openprom
/chosen
/packages
/sbus@3,0/SUNW,fas@3,8800000
/sbus@3,0/SUNW,hme@3,8c00000
/sbus@3,0/SUNW,fas@3,8800000/st
/sbus@3,0/SUNW,fas@3,8800000/sd
/fhc@2,f8800000/sbus-speed@0,500000
/fhc@2,f8800000/eeprom@0,300000
/fhc@2,f8800000/flashprom@0,0
[7mMore [,,q,n,p,c] ? [m
/fhc@2,f8800000/environment@0,400000
/fhc@2,f8800000/ac@0,1000000
/fhc@0,f8800000/flashprom@0,0
/fhc@0,f8800000/sram@0,200000
/fhc@0,f8800000/environment@0,400000
/fhc@0,f8800000/simm-status@0,600000
/fhc@0,f8800000/ac@0,1000000
/central@1f,0/fhc@0,f8800000
/central@1f,0/fhc@0,f8800000/clock-board@0,900000
/central@1f,0/fhc@0,f8800000/zs@0,904000
/central@1f,0/fhc@0,f8800000/zs@0,902000
/central@1f,0/fhc@0,f8800000/eeprom@0,908000
/openprom/client-services
/packages/disk-label
/packages/obp-tftp
/packages/deblocker
/packages/terminal-emulator
ok
ok
ok printenv
Variable Name Value Default Value
disabled-memory-list
disabled-board-list
memory-interleave max max
configuration-policy component component
scsi-initiator-id 7 7
keyboard-click? false false
keymap
ttyb-rts-dtr-off false false
ttyb-ignore-cd true true
ttya-rts-dtr-off false false
ttya-ignore-cd true true
ttyb-mode 9600,8,n,1,- 9600,8,n,1,-
ttya-mode 9600,8,n,1,- 9600,8,n,1,-
sbus-specific-probe
sbus-probe-default 3120 d3120
mfg-mode off off
diag-level max max
powerfail-time 0 0
#power-cycles 0
fcode-debug? false false
[7mMore [,,q,n,p,c] ? [m
output-device ttya screen
[7mMore [,,q,n,p,c] ? [m
input-device ttya keyboard
load-base 16384 16384
boot-command boot disk1 -v boot
auto-boot? false true
[7mMore [,,q,n,p,c] ? [m
watchdog-reboot? false false
diag-file
diag-device disk1 disk diskbrd diskisp dis ...
boot-file
boot-device disk diskbrd diskisp dis ... disk diskbrd diskisp dis ...
local-mac-address? false false
ansi-terminal? true true
screen-#columns 80 80
screen-#rows 24 34
silent-mode? false false
use-nvramrc? false false
nvramrc
security-mode none
security-password
security-#badlogins 0
oem-logo
oem-logo? false false
oem-banner
oem-banner? false false
hardware-revision
last-hardware-update
diag-switch? true true
ok
ok
ok
ok
ok
ok sho devalias
disk /sbus@3,0/SUNW,fas@3,8800000/sd@0,0
diskbrd /sbus@3,0/SUNW,fas@3,8800000/sd@a,0
diskisp /sbus@3,0/QLGC,isp@0,10000/sd@0,0
net /sbus@3,0/SUNW,hme@3,8c00000
cdrom /sbus@3,0/SUNW,fas@3,8800000/sd@6,0:f
tape /sbus@3,0/SUNW,fas@3,8800000/st@4,0
scsi /sbus@3,0/SUNW,fas@3,8800000
disk0 /sbus@3,0/SUNW,fas@3,8800000/sd@0,0
disk1 /sbus@3,0/SUNW,fas@3,8800000/sd@1,0
disk2 /sbus@3,0/SUNW,fas@3,8800000/sd@2,0
disk3 /sbus@3,0/SUNW,fas@3,8800000/sd@3,0
disk4 /sbus@3,0/SUNW,fas@3,8800000/sd@4,0
disk5 /sbus@3,0/SUNW,fas@3,8800000/sd@5,0
tape0 /sbus@3,0/SUNW,fas@3,8800000/st@4,0
tape1 /sbus@3,0/SUNW,fas@3,8800000/st@5,0
ttya /central/fhc/zs@0,902000:a
ttyb /central/fhc/zs@0,902000:b
keyboard /central/fhc/zs@0,904000
keyboard! /central/fhc/zs@0,904000:forcemode
ok
ok
ok
ok
ok
ok help
go - Resume execution of OS
boot - Boot the default OS
boot - Boot from the specified disk
printenv - Display all configuration variables
setenv - Set a configuration variable
devalias - Display all device aliases
devalias - Create or change a device alias
show-devs - Display the names of all devices
Many other commands are available.
ok
ok
ok
ok
ok boot disk -v
Boot device: /sbus@3,0/SUNW,fas@3,8800000/sd@0,0 File and args: -v
Can't open boot device
ok
ok
ok
ok
ok boot disk 0 0 -v
Boot device: /sbus@3,0/SUNW,fas@3,8800000/sd@0,0 File and args: -v
Can't open boot device
ok
ok
ok
ok
ok boot disk1 -v
Boot device: /sbus@3,0/SUNW,fas@3,8800000/sd@1,0 File and args: -v
Bad magic number in disk label
Can't open disk label package
Can't open boot device
ok
ok
|
本站(WWW.)旨在分享和传播互联网科技相关的资讯和技术，将尽最大努力为读者提供更好的信息聚合和浏览方式。
本站(WWW.)站内文章除注明原创外，均为转载、整理或搜集自网络。欢迎任何形式的转载，转载请注明出处。
本站(WWW.)站内文章除注明原创外，均为转载、整理或搜集自网络。欢迎任何形式的转载，转载请注明出处。