arm2410不能连网
来源: 互联网 发布时间:2016-05-30
本文导语: ARM2410的启动信息如下: Copy linux kernel from 0x00030000 to 0x30008000, size = 0x00100000 ... done ...
ARM2410的启动信息如下:
Copy linux kernel from 0x00030000 to 0x30008000, size = 0x00100000 ... done
zImage magic = 0x016f2818
Setup linux parameters at 0x30000100
linux command line is: "noinitrd root=/dev/bon/3 init=/linuxrc console=ttyS0"
MACH_TYPE = 193
NOW, Booting Linux......
Uncompressing Linux.........................................
.. done, booting the kernel.
Linux version 2.4.18-rmk7-pxa1 (root@BC) (gcc version 2.95.2 20000516 (release)
[Rebel.com]) #16 一 9月 5 15:18:05 CST 2005
CPU: ARM/CIRRUS Arm920Tsid(wb) revision 0
Machine: Samsung-SMDK2410
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: noinitrd root=/dev/bon/3 init=/linuxrc console=ttyS0
Console: colour dummy device 80x30
Calibrating delay loop... 99.94 BogoMIPS
Memory: 64MB = 64MB total
Memory: 62360KB available (1603K cod
Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
BlueZ Core ver 2.4 Copyright (C) 2000,2001 Qualcomm Inc
Written 2000,2001 by Maxim Krasnyansky
CPU clock = 202.800000 Mhz, HCLK = 101.400000 Mhz, PCLK = 50.700000 Mhz
Initializing S3C2410 buffer pool for DMA workaround
Starting kswapd
devfs: v1.10 (20020120) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Samsung S3C2410X (i2c) algorithm module version 2.6.1 (20010830)
iic_s3c2410_init: Samsung S3C2410X iic adapter module version 2.6.1 (20010830)
i2c-dev.o: Registered 'Samsung S3C2410X IIC adapter' as minor 0
s3c2410_init: Initialized IIC on S3C2410X, 386kHz clock
iic_s3c2410_init: initialized iic-bus at 0xf4000000.
tts/%d0 at I/O 0x50000000 (irq = 52) is a S3C2410
tts/%d1 at I/O 0x50004000 (irq = 55) is a S3C2410
tts/%d2 at I/O 0x50008000 (irq = 58) is a S3C2410
Console: switching to colour frame buffer device 80x60
Installed S3C2410 frame buffer
pty: 256 Unix98 ptys configured
s3c44b0-kbd initialized
s3c2410-ts initialized
s3c2410-adc initialized
S3C2410 Real Time Clock Driver v0.1
block: 128 slots per
Uniform Multi-Platform E-IDE driver Revision: 6.31nt userc63872 bytes
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xxc>] lr : [] Not taintedAC: 00000015gment userc7 : 00000000
PPP generic driver version 2.4.1
SCSI subsystem driver Revision: 1.00
r
sp : bffffcf8 ip
request_module[scsi_hostadapter]: Root fs not mounted0015gment userr
UDA1341 audio driver initialized
r10: 40000f88 r
NAND device: Manufacture ID: 0xec, Chip ID: 0x76 (Samsung K9D1208V0M)
Find a MTD partition from BONFS -> nandflash0 (bon4)00000000 r4 : 00000000r8 : bffffd14 ip : bffffd2c
Creating 1 MTD partitions on "Samsung K9D1208V0M":
0x00430000-0x03f30000 : "nandflash0 (bon4)"
bon2: 00030000-00130000 (00100000) 00000000
bon3: 00130000-00430000 (00300000) 00000000
Control: C000317F Table: 33FDC000
bon4: 00430000-03f30000 (03b00000) 00000001
bon5: 03f30000-03ffc000 (000cc000) 00000000
pc : [] lr : [
Copy linux kernel from 0x00030000 to 0x30008000, size = 0x00100000 ... done
zImage magic = 0x016f2818
Setup linux parameters at 0x30000100
linux command line is: "noinitrd root=/dev/bon/3 init=/linuxrc console=ttyS0"
MACH_TYPE = 193
NOW, Booting Linux......
Uncompressing Linux.........................................
.. done, booting the kernel.
Linux version 2.4.18-rmk7-pxa1 (root@BC) (gcc version 2.95.2 20000516 (release)
[Rebel.com]) #16 一 9月 5 15:18:05 CST 2005
CPU: ARM/CIRRUS Arm920Tsid(wb) revision 0
Machine: Samsung-SMDK2410
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: noinitrd root=/dev/bon/3 init=/linuxrc console=ttyS0
Console: colour dummy device 80x30
Calibrating delay loop... 99.94 BogoMIPS
Memory: 64MB = 64MB total
Memory: 62360KB available (1603K cod
Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
BlueZ Core ver 2.4 Copyright (C) 2000,2001 Qualcomm Inc
Written 2000,2001 by Maxim Krasnyansky
CPU clock = 202.800000 Mhz, HCLK = 101.400000 Mhz, PCLK = 50.700000 Mhz
Initializing S3C2410 buffer pool for DMA workaround
Starting kswapd
devfs: v1.10 (20020120) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Samsung S3C2410X (i2c) algorithm module version 2.6.1 (20010830)
iic_s3c2410_init: Samsung S3C2410X iic adapter module version 2.6.1 (20010830)
i2c-dev.o: Registered 'Samsung S3C2410X IIC adapter' as minor 0
s3c2410_init: Initialized IIC on S3C2410X, 386kHz clock
iic_s3c2410_init: initialized iic-bus at 0xf4000000.
tts/%d0 at I/O 0x50000000 (irq = 52) is a S3C2410
tts/%d1 at I/O 0x50004000 (irq = 55) is a S3C2410
tts/%d2 at I/O 0x50008000 (irq = 58) is a S3C2410
Console: switching to colour frame buffer device 80x60
Installed S3C2410 frame buffer
pty: 256 Unix98 ptys configured
s3c44b0-kbd initialized
s3c2410-ts initialized
s3c2410-adc initialized
S3C2410 Real Time Clock Driver v0.1
block: 128 slots per
Uniform Multi-Platform E-IDE driver Revision: 6.31nt userc63872 bytes
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xxc>] lr : [] Not taintedAC: 00000015gment userc7 : 00000000
PPP generic driver version 2.4.1
SCSI subsystem driver Revision: 1.00
r
sp : bffffcf8 ip
request_module[scsi_hostadapter]: Root fs not mounted0015gment userr
UDA1341 audio driver initialized
r10: 40000f88 r
NAND device: Manufacture ID: 0xec, Chip ID: 0x76 (Samsung K9D1208V0M)
Find a MTD partition from BONFS -> nandflash0 (bon4)00000000 r4 : 00000000r8 : bffffd14 ip : bffffd2c
Creating 1 MTD partitions on "Samsung K9D1208V0M":
0x00430000-0x03f30000 : "nandflash0 (bon4)"
bon2: 00030000-00130000 (00100000) 00000000
bon3: 00130000-00430000 (00300000) 00000000
Control: C000317F Table: 33FDC000
bon4: 00430000-03f30000 (03b00000) 00000001
bon5: 03f30000-03ffc000 (000cc000) 00000000
pc : [] lr : [