当前位置: 技术问答>linux和unix
2.4.19系统插入USB接口的数码相机后提示一堆错误 怎么回事？
来源: 互联网 发布时间：2016-01-30
本文导语: [/root] [/root] Manufacturer: OLYMPUS Product: C-4040ZOOM SerialNumber: 000197334460 scsi0 : SCSI emulation for USB Mass Storage devices Vendor: OLYMPUS Model: C-4040ZOOM Rev: 1.00 Type: Direct-Access ...
[/root]
[/root]
Manufacturer: OLYMPUS
Product: C-4040ZOOM
SerialNumber: 000197334460
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: OLYMPUS Model: C-4040ZOOM Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
sda : READ CAPACITY failed.
sda : status = 1, message = 00, host = 0, driver = 08
Current sd00:00: sns = 70 2
ASC=3a ASCQ= 0
Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00
sda : block size assumed to be 512 bytes, disk size 1GB.
Partition check:
/dev/scsi/host0/bus0/target0/lun0: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
unable to read partition table
sda : READ CAPACITY failed.
sda : status = 1, message = 00, host = 0, driver = 08
Current sd00:00: sns = 70 2
ASC=3a ASCQ= 0
Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00
sda : block size assumed to be 512 bytes, disk size 1GB.
sda: test WP failed, assume Write Enabled
/dev/scsi/host0/bus0/target0/lun0: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
[/root]
[/root]
[/root]
有哪位高手告诉在下努力方向，或则干脆告诉我怎么解决
[/root]
Manufacturer: OLYMPUS
Product: C-4040ZOOM
SerialNumber: 000197334460
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: OLYMPUS Model: C-4040ZOOM Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
sda : READ CAPACITY failed.
sda : status = 1, message = 00, host = 0, driver = 08
Current sd00:00: sns = 70 2
ASC=3a ASCQ= 0
Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00
sda : block size assumed to be 512 bytes, disk size 1GB.
Partition check:
/dev/scsi/host0/bus0/target0/lun0: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
unable to read partition table
sda : READ CAPACITY failed.
sda : status = 1, message = 00, host = 0, driver = 08
Current sd00:00: sns = 70 2
ASC=3a ASCQ= 0
Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00
sda : block size assumed to be 512 bytes, disk size 1GB.
sda: test WP failed, assume Write Enabled
/dev/scsi/host0/bus0/target0/lun0: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
[/root]
[/root]
[/root]
有哪位高手告诉在下努力方向，或则干脆告诉我怎么解决
|
我注意到有如下信息，我以前移植SATA硬盘的驱动时也碰到过分区表读不了的情况，后来发现是字序问题。对你的问题，没有更多的信息，无法提供帮助。你何不一步一步地缩小范围？找到出错的代码在哪就好办了。
Partition check:
/dev/scsi/host0/bus0/target0/lun0: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
unable to read partition table
sda : READ CAPACITY failed.
Partition check:
/dev/scsi/host0/bus0/target0/lun0: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
unable to read partition table
sda : READ CAPACITY failed.
您可能感兴趣的文章:
本站(WWW.)旨在分享和传播互联网科技相关的资讯和技术，将尽最大努力为读者提供更好的信息聚合和浏览方式。
本站(WWW.)站内文章除注明原创外，均为转载、整理或搜集自网络。欢迎任何形式的转载，转载请注明出处。
本站(WWW.)站内文章除注明原创外，均为转载、整理或搜集自网络。欢迎任何形式的转载，转载请注明出处。