当前位置:  技术问答>linux和unix

Real2410开发板下NFS文件系统挂载失败。

    来源: 互联网  发布时间:2016-11-29

    本文导语:  已经困扰我好长时间了。主机NFS服务已经用其他LINUX客户端试过挂载了,可以确认主机NFS运行正常的。KERNEL移植后启动信息如下: VIVI version 0.1.4 (root@zxy.zxy) (gcc version 2.95.3 20010315 (release)) #0.1.T MMU table base addres...

已经困扰我好长时间了。主机NFS服务已经用其他LINUX客户端试过挂载了,可以确认主机NFS运行正常的。KERNEL移植后启动信息如下:
VIVI version 0.1.4 (root@zxy.zxy) (gcc version 2.95.3 20010315 (release)) #0.1.T
MMU table base address = 0x33DFC000                                             
Succeed memory mapping.                                                         
NAND device: Manufacture ID: 0xec, Chip ID: 0x76 (Samsung K9D1208V0M)           
Found saved vivi parameters.                                                    
Press Return to start the LINUX now, any other key for vivi                     
Copy linux kernel from 0x00030000 to 0x30008000, size = 0x00100000 ... done     
zImage magic = 0x016f2818                                                       
Setup linux parameters at 0x30000100                                            
linux command line is: "console=ttyS0 root=/dev/nfs nfsroot=192.168.1.17:/real2"
MACH_TYPE = 193                                                                 
NOW, Booting Linux......                                                        
Uncompressing Linux.......................................................... d.
Linux version 2.4.18-rmk7-pxa1 (root@zxy.zxy) (gcc version 2.95.3 20010315 (relT
CPU: ARM/CIRRUS Arm920Tsid(wb) revision 0                                       
Machine: Samsung-SMDK2410                                                       
On node 0 totalpages: 16384                                                     
zone(0): 16384 pages.                                                           
zone(1): 0 pages.                                                               
zone(2): 0 pages.                                                               
Kernel command line: console=ttyS0 root=/dev/nfs nfsroot=192.168.1.17:/real2410f
DEBUG: timer count 15626                                                        
Console: colour dummy device 80x30                                              
Calibrating delay loop... 99.94 BogoMIPS                                        
Memory: 64MB = 64MB total                                                       
Memory: 62528KB available (1428K code, 438K data, 72K init)                     
Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)                   
Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)                    
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)                     
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)                   
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)                    
POSIX conformance testing by UNIFIX                                             
Linux NET4.0 for Linux 2.4                                                      
Based upon Swansea University Computer Society NET3.039                         
Initializing RT netlink socket                                                  
CPU clock = 200.000 Mhz, HCLK = 100.000 Mhz, PCLK = 50.000 Mhz                  
Initializing S3C2410 buffer pool for DMA workaround                             
check your kernel config.                                                       
USB Function Character Driver Interface - 0.5, (C) 2001, Extenex Corp.          
usbctl: Opened for usb-char                                                     
usbctl: Started for usb-char                                                    
Starting kswapd                                                                 
devfs: v1.10 (20020120) Richard Gooch (rgooch@atnf.csiro.au)                    
devfs: boot_options: 0x1                                                        
ttyS%d0 at I/O 0x50000000 (irq = 52) is a S3C2410                               
ttyS%d1 at I/O 0x50004000 (irq = 55) is a S3C2410                               
ttyS%d2 at I/O 0x50008000 (irq = 58) is a S3C2410                               
test lcd backlight                                                              
Console: switching to colour frame buffer device 12x30                          
Installed S3C2410 frame buffer for TFT 320x240 LCD.                             
pty: 256 Unix98 ptys configured                                                 
leds initialized                                                                
s3c2410-ts initialized                                                          
S3C2410 Real Time Clock Driver v0.1                                             
block: 128 slots per queue, batch=32                                            
eth0: cs8900 rev K(3.3 Volts) found at 0xd0000300                               
cs89x0 media RJ-45, IRQ 37                                                      
SCSI subsystem driver Revision: 1.00                                            
request_module[scsi_hostadapter]: Root fs not mounted                           
UDA1341 audio driver initialized                                                
NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V)     
NAND_ECC_NONE selected by board driver. This is not recommended !!              
Creating 3 MTD partitions on "NAND 64MiB 3,3V":                                 
0x00000000-0x00030000 : "boot"                                                  
0x00030000-0x00200000 : "kernel"                                                
0x00200000-0x04000000 : "rootfs"                                                
usb.c: registered new driver usbdevfs                                           
usb.c: registered new driver hub                                                
usb-ohci.c: USB OHCI at membase 0xe9000000, IRQ 26                              
usb.c: new USB bus registered, assigned bus number 1                            
hub.c: USB hub found                                                            
hub.c: 2 ports detected                                                         
usb.c: registered new driver usb_mouse                                          
usbmouse.c: v1.6:USB HID Boot Protocol mouse driver                             
usb.c: registered new driver keyboard                                           
usbkbd.c: :USB HID Boot Protocol keyboard driver                                
usb.c: registered new driver usblp                                              
printer.c: v0.8:USB Printer Device Class driver                                 
Initializing USB Mass Storage driver...                                         
usb.c: registered new driver usb-storage                                        
USB Mass Storage support registered.                                            
mice: PS/2 mouse device common for all mice                                     
NET4: Linux TCP/IP 1.0 for NET4.0                                               
IP Protocols: ICMP, UDP, TCP                                                    
IP: routing cache hash table of 512 buckets, 4Kbytes                            
TCP: Hash tables configured (established 4096 bind 4096)                        
IP-Config: Complete:                                                            
      device=eth0, addr=192.168.1.100, mask=255.255.255.0, gw=192.168.1.17,     
     host=www, domain=, nis-domain=realembed.com,                               
     bootserver=192.168.1.17, rootserver=192.168.1.17, rootpath=                
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.                             
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com                 
Looking up port of RPC 100003/2 on 192.168.1.17                                 
hub.c: USB new device connect on bus1/2, assigned device number 2               
usb.c: USB device not accepting new address=2 (error=-110)                      
hub.c: USB new device connect on bus1/2, assigned device number 3               
usb.c: USB device not accepting new address=3 (error=-110)                      
NETDEV WATCHDOG: eth0: transmit timed out                                       
NETDEV WATCHDOG: eth0: transmit timed out    
。。。
portmap: server 192.168.1.17 not responding, timed out                          
Root-NFS: Unable to get mountd port number from server, using default   
。。。
NETDEV WATCHDOG: eth0: transmit timed out                                       
NETDEV WATCHDOG: eth0: transmit timed out                                       
mount: server 192.168.1.17 not responding, timed out                            
Root-NFS: Server returned error -5 while mounting /real2410/root_nfs            
VFS: Unable to mount root fs via NFS, trying floppy.                            
request_module[block-major-2]: Root fs not mounted                              
VFS: Cannot open root device "nfs" or 02:00                                     
Please append a correct "root=" boot option                                     
Kernel panic: VFS: Unable to mount root fs on 02:00                             
 

|
portmap: server 192.168.1.17 not responding, timed out   
好像网络不通嘛。
建议楼主从flash启动,再去mount nfs看看行不行

    
 
 

您可能感兴趣的文章:

 
本站(WWW.)旨在分享和传播互联网科技相关的资讯和技术,将尽最大努力为读者提供更好的信息聚合和浏览方式。
本站(WWW.)站内文章除注明原创外,均为转载、整理或搜集自网络。欢迎任何形式的转载,转载请注明出处。












  • 相关文章推荐
  • java命名空间java.sql类types的类成员方法: real定义及介绍
  • J2ME浮点数计算包 Real.java
  • mysql阻塞在了mysql_real_connect函数调用处
  • 网络技术 iis7站长之家
  • mysql_real_query报语法错
  • 多用户协作编辑平台 real-edit
  • Real Shadow
  • Real chanlleges here, only for experts
  • 能提供一本real time linux方面的编程书籍吗?谢谢!
  • 请教real mode 和protected mode ,谁能仔细讲讲?
  • linux下怎么装real播放器?
  • 各位高手 你们好 请问那里可以查到有关Linux Real TTY的标准的内容
  • python检测lvs real server状态
  • real6410 2.6.18老内核编译
  • setitimer(ITIMER_REAL...以系统实时时间计算超时发出SIGALRM信号?
  • real 6410 开发板 qt问题
  • zhcon-0.2.3安装好后,执行zhcon命令出错:/dev/pts/0 is not real tty or vc. Please exit current tty and try again.
  • Real chanlleges here, only for experts(auto expandable table cell)
  • PHP函数addslashes与mysql_real_escape_string区别分析
  • PHP函数addslashes和mysql_real_escape_string的区别
  • user ,real ,system time 分别是什么意思?在超线程中是如何统计的?


  • 站内导航:


    特别声明:169IT网站部分信息来自互联网,如果侵犯您的权利,请及时告知,本站将立即删除!

    ©2012-2021,,E-mail:www_#163.com(请将#改为@)

    浙ICP备11055608号-3