当前位置: 技术问答>linux和unix
关于mini2440根文件系统配置出现的问题,求高手解答
来源: 互联网 发布时间:2017-03-04
本文导语: 我按照友善之臂给的方法配置文件系统能够成功启动。但是网口在第一次启动时能够被激活,断电后再启动就又不能被激活了。请问这个应该如何配置???以下是部分启动信息: 第一次启动: block 62 is bad block ...
我按照友善之臂给的方法配置文件系统能够成功启动。但是网口在第一次启动时能够被激活,断电后再启动就又不能被激活了。请问这个应该如何配置???以下是部分启动信息:
第一次启动:
block 62 is bad
block 63 is bad
block 1059 is bad
block 1449 is bad
yaffs_read_super: isCheckpointed 0
VFS: Mounted root (yaffs filesystem) on device 31:3.
Freeing init memory: 152K
----------munt all----------------
run-parts: /etc/network/if-pre-up.d: No such file or directory
run-parts: /etc/network/if-up.d: No such file or directory
run-parts: /etc/network/if-pre-up.d: No such file or directory
eth0: link down
run-parts: /etc/network/if-up.d: No such file or directory
***********************************************
****************Studying ARM*********************
Kernel version:linux-2.6.32.2
Student:Chen changhao
Date:2012.4.16
***********************************************
Please press Enter to activate this console. eth0: link up, 100Mbps, full-duplex
, lpa 0xCDE1
[root@mini2440/]#
断电后再启动:
Partially written block 115 detected
Partially written block 115 detected
Partially written block 115 detected
Partially written block 115 detected
Partially written block 115 detected
Partially written block 115 detected
Partially written block 115 detected
Partially written block 115 detected
Partially written block 115 detected
yaffs_read_super: isCheckpointed 0
VFS: Mounted root (yaffs filesystem) on device 31:3.
Freeing init memory: 152K
----------munt all----------------
ifup: interface lo already configured
ifup: interface eth0 already configured
***********************************************
****************Studying ARM*********************
Kernel version:linux-2.6.32.2
Student:Chen changhao
Date:2012.4.16
***********************************************
Please press Enter to activate this console.
[root@mini2440/]#
第一次启动:
block 62 is bad
block 63 is bad
block 1059 is bad
block 1449 is bad
yaffs_read_super: isCheckpointed 0
VFS: Mounted root (yaffs filesystem) on device 31:3.
Freeing init memory: 152K
----------munt all----------------
run-parts: /etc/network/if-pre-up.d: No such file or directory
run-parts: /etc/network/if-up.d: No such file or directory
run-parts: /etc/network/if-pre-up.d: No such file or directory
eth0: link down
run-parts: /etc/network/if-up.d: No such file or directory
***********************************************
****************Studying ARM*********************
Kernel version:linux-2.6.32.2
Student:Chen changhao
Date:2012.4.16
***********************************************
Please press Enter to activate this console. eth0: link up, 100Mbps, full-duplex
, lpa 0xCDE1
[root@mini2440/]#
断电后再启动:
Partially written block 115 detected
Partially written block 115 detected
Partially written block 115 detected
Partially written block 115 detected
Partially written block 115 detected
Partially written block 115 detected
Partially written block 115 detected
Partially written block 115 detected
Partially written block 115 detected
yaffs_read_super: isCheckpointed 0
VFS: Mounted root (yaffs filesystem) on device 31:3.
Freeing init memory: 152K
----------munt all----------------
ifup: interface lo already configured
ifup: interface eth0 already configured
***********************************************
****************Studying ARM*********************
Kernel version:linux-2.6.32.2
Student:Chen changhao
Date:2012.4.16
***********************************************
Please press Enter to activate this console.
[root@mini2440/]#
|
已解决
您可能感兴趣的文章:
本站(WWW.)旨在分享和传播互联网科技相关的资讯和技术,将尽最大努力为读者提供更好的信息聚合和浏览方式。
本站(WWW.)站内文章除注明原创外,均为转载、整理或搜集自网络。欢迎任何形式的转载,转载请注明出处。
本站(WWW.)站内文章除注明原创外,均为转载、整理或搜集自网络。欢迎任何形式的转载,转载请注明出处。