当前位置: 技术问答>linux和unix
内核启动不了(nfs做为根文件系统)
来源: 互联网 发布时间:2016-12-08
本文导语: No device for DAI UDA134X No device for DAI s3c24xx-i2s S3C24XX_UDA134X SoC Audio driver UDA134X SoC Audio Codec asoc: UDA134X s3c24xx-i2s mapping ok ALSA device list: #0: S3C24XX_UDA134X (UDA134X) TCP cubic registered RPC: Registered udp transport mo...
No device for DAI UDA134X
No device for DAI s3c24xx-i2s
S3C24XX_UDA134X SoC Audio driver
UDA134X SoC Audio Codec
asoc: UDA134X s3c24xx-i2s mapping ok
ALSA device list:
#0: S3C24XX_UDA134X (UDA134X)
TCP cubic registered
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
lib80211: common routines for IEEE802.11 drivers
s3c2410-rtc s3c2410-rtc: hctosys: invalid date/time
yaffs: dev is 32505858 name is "mtdblock2"
yaffs: passed flags ""
yaffs: Attempting MTD mount on 31.2, "mtdblock2"
yaffs: auto selecting yaffs2
block 1385 is bad
block 1565 is bad
yaffs_read_super: isCheckpointed 0
VFS: Mounted root (yaffs filesystem) on device 31:2.
Freeing init memory: 188K
Warning: unable to open an initial console.
Failed to execute nuxrc. Attempting defaults...
Kernel panic - not syncing: No init found. Try passing init= option to kernel.
Backtrace:
[] (dump_backtrace+0x0/0x10c) from [] (dump_stack+0x18/0x1c)
r7:00000000 r6:c04b5f80 r5:c04b5940 r4:c047e248
[] (dump_stack+0x0/0x1c) from [] (panic+0x4c/0x12c)
[] (panic+0x0/0x12c) from [] (init_post+0xec/0x178)
r3:00000000 r2:c388be00 r1:c04ec000 r0:c040dc3c
[] (init_post+0x0/0x178) from [] (kernel_init+0xcc/0xf4)
r5:c001eeb0 r4:c001f2cc
[] (kernel_init+0x0/0xf4) from [] (do_exit+0x0/0x620)
r7:00000000 r6:00000000 r5:00000000 r4:00000000
我用的是天嵌的2440,然后按照国嵌的视频制作根文件系统,然后把nfs做为根文件系统,先通过tftp 31000000 uImage,
把uImage下载到sdram里面,然后再bootm 31000000,启动内核,结果出现上面错误,(我的nfs服务是好的,我可以在虚拟机上自己挂载自己的。
有哪位高手帮我看看,小弟不胜感激,这个问题弄了我好几天了。
)
No device for DAI s3c24xx-i2s
S3C24XX_UDA134X SoC Audio driver
UDA134X SoC Audio Codec
asoc: UDA134X s3c24xx-i2s mapping ok
ALSA device list:
#0: S3C24XX_UDA134X (UDA134X)
TCP cubic registered
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
lib80211: common routines for IEEE802.11 drivers
s3c2410-rtc s3c2410-rtc: hctosys: invalid date/time
yaffs: dev is 32505858 name is "mtdblock2"
yaffs: passed flags ""
yaffs: Attempting MTD mount on 31.2, "mtdblock2"
yaffs: auto selecting yaffs2
block 1385 is bad
block 1565 is bad
yaffs_read_super: isCheckpointed 0
VFS: Mounted root (yaffs filesystem) on device 31:2.
Freeing init memory: 188K
Warning: unable to open an initial console.
Failed to execute nuxrc. Attempting defaults...
Kernel panic - not syncing: No init found. Try passing init= option to kernel.
Backtrace:
[] (dump_backtrace+0x0/0x10c) from [] (dump_stack+0x18/0x1c)
r7:00000000 r6:c04b5f80 r5:c04b5940 r4:c047e248
[] (dump_stack+0x0/0x1c) from [] (panic+0x4c/0x12c)
[] (panic+0x0/0x12c) from [] (init_post+0xec/0x178)
r3:00000000 r2:c388be00 r1:c04ec000 r0:c040dc3c
[] (init_post+0x0/0x178) from [] (kernel_init+0xcc/0xf4)
r5:c001eeb0 r4:c001f2cc
[] (kernel_init+0x0/0xf4) from [] (do_exit+0x0/0x620)
r7:00000000 r6:00000000 r5:00000000 r4:00000000
我用的是天嵌的2440,然后按照国嵌的视频制作根文件系统,然后把nfs做为根文件系统,先通过tftp 31000000 uImage,
把uImage下载到sdram里面,然后再bootm 31000000,启动内核,结果出现上面错误,(我的nfs服务是好的,我可以在虚拟机上自己挂载自己的。
有哪位高手帮我看看,小弟不胜感激,这个问题弄了我好几天了。
)
|
Failed to execute nuxrc. Attempting defaults...
Kernel panic - not syncing: No init found. Try passing init= option to kernel.
这样看上去好像内核启动没错,最后执行init时找rc文件失败了,确认下这个rc文件是否正常。
Kernel panic - not syncing: No init found. Try passing init= option to kernel.
这样看上去好像内核启动没错,最后执行init时找rc文件失败了,确认下这个rc文件是否正常。