当前位置: 技术问答>linux和unix
[求助]mail服务器当掉，大家帮帮忙，谢谢谢谢
来源: 互联网 发布时间：2016-02-04
本文导语: 问题描述 Reboot服务器后，出现如下提示： 大家帮帮忙，我该如何解决这个问题 谢谢，谢谢（下文我是手动敲上去的，若有错误单词，请见谅） /dev/hda1/ |============== ……% …… …… IO_support = 3 (32-bit w/sycn) umm...
问题描述
Reboot服务器后，出现如下提示：
大家帮帮忙，我该如何解决这个问题
谢谢，谢谢（下文我是手动敲上去的，若有错误单词，请见谅）
/dev/hda1/ |============== ……%
……
……
IO_support = 3 (32-bit w/sycn)
ummaskirq = 1 (on)
using_dma = 1 (on)
Activating swap...Adding 979924K swap on /dev/hda7
Priovity : -l extents:laeross : 979924k done.
Check root file system with errors,check forced.
dev/hda/: contains a file system with errors,check forced.
dev/hda/:Inodes that were part of a corrupted orphan linked list fuond.
/dev/hda/: UNEXPFCTED INCONSISTENCY;RUN fack MANUALLY
(i,e,without -a or -p options)
fsck died with exit status 4
failed (Code 4) (显示为红色，提问者注释)
An automatic file system check (fsck) of the root filesystem failed.
A manual fsck must be performed,then the system restarted.
The fsck should be performed in a maintenance mode with the root filesystem
mounted in read-only mode.
The root filesystem is currently mounted in read-only mode.
A maintenance shell with now be started.
After proforming system maintenance,press CONTROL-D
to terminater the maintenance shell and restart the system.
Give root password for maintenance
(or Control-D to continue):
Reboot服务器后，出现如下提示：
大家帮帮忙，我该如何解决这个问题
谢谢，谢谢（下文我是手动敲上去的，若有错误单词，请见谅）
/dev/hda1/ |============== ……%
……
……
IO_support = 3 (32-bit w/sycn)
ummaskirq = 1 (on)
using_dma = 1 (on)
Activating swap...Adding 979924K swap on /dev/hda7
Priovity : -l extents:laeross : 979924k done.
Check root file system with errors,check forced.
dev/hda/: contains a file system with errors,check forced.
dev/hda/:Inodes that were part of a corrupted orphan linked list fuond.
/dev/hda/: UNEXPFCTED INCONSISTENCY;RUN fack MANUALLY
(i,e,without -a or -p options)
fsck died with exit status 4
failed (Code 4) (显示为红色，提问者注释)
An automatic file system check (fsck) of the root filesystem failed.
A manual fsck must be performed,then the system restarted.
The fsck should be performed in a maintenance mode with the root filesystem
mounted in read-only mode.
The root filesystem is currently mounted in read-only mode.
A maintenance shell with now be started.
After proforming system maintenance,press CONTROL-D
to terminater the maintenance shell and restart the system.
Give root password for maintenance
(or Control-D to continue):
|
文件系统损坏，用光盘进去，然后fsck -y /dev/hda1到hdaN，N的取值看你的分区情况
您可能感兴趣的文章:
本站(WWW.)旨在分享和传播互联网科技相关的资讯和技术，将尽最大努力为读者提供更好的信息聚合和浏览方式。
本站(WWW.)站内文章除注明原创外，均为转载、整理或搜集自网络。欢迎任何形式的转载，转载请注明出处。
本站(WWW.)站内文章除注明原创外，均为转载、整理或搜集自网络。欢迎任何形式的转载，转载请注明出处。