当前位置: 技术问答>linux和unix
高手:看看下面这段资料的格式,用什么工具能去掉里面的注释,格式控制符等
来源: 互联网 发布时间:2015-10-17
本文导语: ." ``http://www.nominum.com''. ." ." $Id: dhcpd.conf.5,v 1.63.2.27 2005/05/02 22:43:24 dhankins Exp $ ." .TH dhcpd.conf 5 .SH NAME dhcpd.conf - dhcpd configuration file .SH DESCRIPTION The dhcpd.conf file contains configuration information for .IR dhcpd, the I...
." ``http://www.nominum.com''.
."
." $Id: dhcpd.conf.5,v 1.63.2.27 2005/05/02 22:43:24 dhankins Exp $
."
.TH dhcpd.conf 5
.SH NAME
dhcpd.conf - dhcpd configuration file
.SH DESCRIPTION
The dhcpd.conf file contains configuration information for
.IR dhcpd,
the Internet Systems Consortium DHCP Server.
.PP
The dhcpd.conf file is a free-form ASCII text file. It is parsed by
the recursive-descent parser built into dhcpd. The file may contain
extra tabs and newlines for formatting purposes. Keywords in the file
are case-insensitive. Comments may be placed anywhere within the
file (except within quotes). Comments begin with the # character and
end at the end of the line.
.PP
The file essentially consists of a list of statements. Statements
fall into two broad categories - parameters and declarations.
.PP
Parameter statements either say how to do something (e.g., how long a
lease to offer), whether to do something (e.g., should dhcpd provide
addresses to unknown clients), or what parameters to provide to the
client (e.g., use gateway 220.177.244.7).
.PP
Declarations are used to describe the topology of the
network, to describe clients on the network, to provide addresses that
can be assigned to clients, or to apply a group of parameters to a
group of declarations. In any group of parameters and declarations,
all parameters must be specified before any declarations which depend
on those parameters may be specified.
.PP
Declarations about network topology include the fIshared-networkfR
and the fIsubnetfR declarations. If clients on a subnet are to be
assigned addresses
."
." $Id: dhcpd.conf.5,v 1.63.2.27 2005/05/02 22:43:24 dhankins Exp $
."
.TH dhcpd.conf 5
.SH NAME
dhcpd.conf - dhcpd configuration file
.SH DESCRIPTION
The dhcpd.conf file contains configuration information for
.IR dhcpd,
the Internet Systems Consortium DHCP Server.
.PP
The dhcpd.conf file is a free-form ASCII text file. It is parsed by
the recursive-descent parser built into dhcpd. The file may contain
extra tabs and newlines for formatting purposes. Keywords in the file
are case-insensitive. Comments may be placed anywhere within the
file (except within quotes). Comments begin with the # character and
end at the end of the line.
.PP
The file essentially consists of a list of statements. Statements
fall into two broad categories - parameters and declarations.
.PP
Parameter statements either say how to do something (e.g., how long a
lease to offer), whether to do something (e.g., should dhcpd provide
addresses to unknown clients), or what parameters to provide to the
client (e.g., use gateway 220.177.244.7).
.PP
Declarations are used to describe the topology of the
network, to describe clients on the network, to provide addresses that
can be assigned to clients, or to apply a group of parameters to a
group of declarations. In any group of parameters and declarations,
all parameters must be specified before any declarations which depend
on those parameters may be specified.
.PP
Declarations about network topology include the fIshared-networkfR
and the fIsubnetfR declarations. If clients on a subnet are to be
assigned addresses
|
perl
shell script
shell script
|
word 替换